Name

_RadioSample

-----------------------------------------------------------------------------------------------------------------------
Description

This sample code shows how to detect if the radio is off or on,
how to turn on the radio, how to turn off the radio, how to query the sim card for
the phone number of the device, how to check if the device has service available
using the signal level.

Features:

- How to detect if the radio is off or on.
- How to turn the radio on.
- How to turn the radio off.
- How to query the SIM card for the phone number.
- How to check if the device has service available using the signal level.

-----------------------------------------------------------------------------------------------------------------------
Builds with

This project was built using Palm OS Developer Suite version 1.2.0.23.
This project also buids with Codewarrior 9 and
GCC command line (Please use GCC_makefile to build)



------------------------------------------------------------------------------------------------------------------------
Devices

Should run on all Palm OS devices
Should not crash on other devices

------------------------------------------------------------------------------------------------------------------------

Requirements

No specific requirements

-----------------------------------------------------------------------------------------------------------------------
Libraries Used

Telephony library

------------------------------------------------------------------------------------------------------------------------
How to Run

1. Launch the "RadioSample"
application
2. Tap on "RadioOff"
3. Tap on "Get Mobile Info"
4. Tap on Radio On"
5. Tap on "Get Mobile Info"

Expected Results:

3. 
a. The "Radio" field should
display "Radio is off" 
b. The "Phone #" field
should display "Unavailable"
c. The "Signal Level" field
should display the signal value
5. 
a. The "Radio" field should
display "Radio is on"
b. The "Phone #" field
should display the correct phone
number 
c. The "Signal Level" field
should display the signal value

-----------------------------------------------------------------------------------------------------------------------

Note

----------------------------------------------------------------------------------------------------------------------

